The official battery for the Canon R5 is the Canon LP-E6NH Lithium-Ion Battery (7.2V, 2130mAh). Providing you purchased your Canon R5 from an authorized Canon retailer, then you should find one Canon LP-E6NH battery in the box with your R5. The older and now discontinued Canon LP-E6N and LP-E6 batteries are also supported in the R5. Included is the instruction manual for the LP-E6 battery. Solution. Please click the attahcment link below to view the manual. Attachment. LP-E6 manual.pdf After disconnecting the chargerโ€™s power plug, do not touch the prongs for at least 5 sec. Do not charge any battery other than a Battery Pack LP-E17. Battery Pack LP-E17 is dedicated to Canon products only. Using it with an incompatible battery charger or product may result in malfunction or accidents for which Canon cannot be held liable.

The range of Canon battery chargers is compatible with many popular DSLR and Mirrorless Canon cameras such as Canon M50, Canon 1500D, Canon 700D and Canon 60D. Our Nikon battery chargers cover a wide range of DSLR and mirrorless Nikon cameras , such as Nikon D3100, Nikon D3500, Nikon D7200, and Nikon Coolpix.

You can use the compact power adapter, or a computer to charge the battery. The procedure for using a USB cable to charge the included battery is explained below. 1. Slide the cover and open it . 2. While pressing the battery lock in the direction of the arrow, insert the battery as shown and push it in until it clicks into the locked position.
Thus you need about double the battery pack in mAh on a battery pack to equal the same mAh on a Canon battery. Quoting from Wing2 in that thread. The key PD spec. to watch for is the 9V must be 3A or higher and 5V must be 3A or higher)
6-B. CA-DC30E : Plug the power cord into the compact power adapter, then plug the other end into a power outlet. 7. Charging begins and the USB charge lamp lights up. The lamp turns off when charging finishes. 8. Remove the compact power adapter from the power outlet and the interface cable from the camera. IMPORTANT. Before using the camera again, be sure to recharge the battery. After the red lamp lights, continue to recharge the battery for an hour to attain a full charge. After recharging the battery, detach it and unplug the power cord from the power outlet. The time required to recharge the battery depends on the ambient temperature and battery's power .
  • 68mw6rldu7.pages.dev/244
  • 68mw6rldu7.pages.dev/40
  • 68mw6rldu7.pages.dev/288
  • 68mw6rldu7.pages.dev/280
  • 68mw6rldu7.pages.dev/81
  • 68mw6rldu7.pages.dev/439
  • 68mw6rldu7.pages.dev/212
  • 68mw6rldu7.pages.dev/376
  • how to use canon battery charger